*Product can differ from image
PENOSIL Installation Gunfoam 65 156 installation foam with increased foam yield
PRODUCT DESCRIPTION
Professional polyurethane gun foam with higher foam yield for installation of window and door frames, sealing of joints and penetrations, as well as thermal and acoustic insulation. Provides good adhesion to most materials such as wood, concrete, stone, gypsum, metal, PVC and polystyrene. Ensures airtight and soundproof sealing.
---------------------------
ADVANTAGES
- High foam yield.
- Uniform structure and moderate secondary expansion.
- Suitable for use at higher temperatures, up to +40 °C.
- Low curing pressure.
- Excellent thermal and acoustic insulation performance.
---------------------------
APPLICATION
- Installation and sealing of windows and doors.
- Filling and sealing of gaps and holes.
- Sealing of connection joints.
- Insulation of penetrations.
- Reduction of thermal bridge effects.
- Thermal and acoustic insulation.
SUITABLE SURFACES
- Wood
- Concrete
- PVC
- Bricks
- Most metals
- Gypsum boards
- EPS
- Roof tiles
IEPAKOJUMS
Aerosol can 1000 ml,
filling 870 ml,
12 cans per box
---------------------------
USAGE
Clean surfaces from dust, dirt, and oil stains. For best results, moisten dry surfaces by spraying with water. Protect adjacent surfaces with paper, plastic film, or another suitable material. If necessary, for outdoor use provide additional protection against weather conditions (rain, wind, etc.).
Shake the foam can thoroughly at least 20 times before use. Remove the cap. Hold the can upright with the valve facing up. Firmly screw the can onto the gun, holding the gun by the handle with one hand and screwing the can with the other. Make sure the gun is not pointed at people. Avoid screwing the can onto the gun with the valve facing down. Do not unscrew the gun from the can. During screwing, do not bend or turn the can upside down. The working position of the can after fixing – upside down. Foam output can be regulated with the gun trigger and adjustment screw.
Fill the joint about 65%, as the foam expands. For larger gaps, apply the foam in layers and moisten between layers for best results. After curing, cut off the excess foam.
---------------------------
TIPS
- Protect adjacent surfaces with paper, film, or another suitable material.
- Since construction materials are very diverse, we recommend performing a preliminary compatibility test.
- When working at low temperatures, the foam can must be preheated to room temperature (about 20 °C).
- During curing, if necessary, use additional protection against weather conditions (rain, wind, etc.).
- Use Penosil Foam Cleaner to clean tools and surfaces from uncured foam.
- Use Penosil Cleaning Wipes to clean hands and clothes from uncured foam.
- Penosil Foam Remover softens cured foam and makes it easier to remove.
- Air temperature during application: +5 °C to +40 °C.
LIMITATIONS
- Cured foam is sensitive to UV rays and must be covered.
- Do not use at temperatures below +5 °C.
- Foam does not adhere to polyethylene (PE), PTFE (Teflon®), or silicone surfaces.
- Do not cover foam before it is fully cured.
WARNING
H222 – Extremely flammable aerosol.
H229 – Pressurized container: may explode when heated.
H315 – Causes skin irritation.
H317 – May cause an allergic skin reaction.
H319 – Causes serious eye irritation.
H334 – If inhaled, may cause allergy or asthma symptoms or breathing difficulties.
H335 – May cause respiratory irritation.
H351 – Suspected of causing cancer.
H362 – May cause harm to breast-fed children.
H373 – May cause damage to organs through prolonged or repeated exposure.
H413 – May cause long-lasting harmful effects to aquatic life.
P101: If medical advice is needed, have product container or label at hand.
P102: Keep out of reach of children.
P210: Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P211: Do not spray on an open flame or other ignition source.
P251: Do not pierce or burn, even after use.
P271: Use only outdoors or in well-ventilated areas.
P280: Wear protective gloves/face protection/protective clothing/respiratory protection/protective footwear.
P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.
P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
P501: Dispose of contents/container in accordance with local waste disposal regulations.
Additional information:
EUH204: Contains isocyanates. May produce an allergic reaction.